| Customization: | Available |
|---|---|
| Type: | Preform Injection |
| Structure: | Horizontal |
|
Still deciding? Get samples of US$ 0.01/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
B.SJ-1080 Injection Molding Machine
Injection molding machine applies high responsive proportional variable pump system to replace the traditional 3-way proportional valve control mode , thus to enable the high match of power between hydraulic out put and machine effective operation which avoids energy loss from high pressure throttle , flow , compared with normal constant pump drive machine the variable pump drive machine is able to save . In addition , the machine less heating enables save of cooling water by 30% , debasing peripheral noise and extension of service life hydraulic sealing part sand oil to minimize operation and maintenance cost and meanwhile to meet the strict international environment protective policy finally , the amount of the output increases obviously.
Main Technical Parmaters
| Model | B@JS1080×1 |
| Injection Unit | A B C |
| Screw Diameter mm | 34 36 40 |
| Screw L/D Ratio L/D | 22.2 21 18.9 |
| Shot Size(Theoretical) cm3 | 147 165 204 |
| Injection Weight ps | 134 150 185 |
| Injection Weight ps | 4.7 5.3 6.5 |
| Injection Rate g/s | 85 95 110 |
| Plasticizing Capacity g/s | 14 16 20 |
| Injection Pressure Mpa | 205 183 148 |
| Screw Speed r/min | 200 |
| Clamping Unit | |
| Clamp Tonnage KN | 1080 |
| Toggle Stroke mm | 340 |
| Space Between Tie Bars mm | 375*375 |
| Max. Mold Height mm | 380 |
| Min. Mold Height mm | 150 |
| Ejector Stroke mm | 100 |
| Ejector Tonnage KN | 33 |
| Other | |
| Max. Pump Pressure Mpa | 16 |
| Pump Motor Power kW | 11 |
| Heater Powder kW | 5.9 |
| Machine Dimensions(L*W*H) m | 4.2×1.3×1.75 |
| Machine Weight(Appoximat) t | 3.25 |
){kind=link}